Network Working Group A. Niemi Internet-Draft Nokia Intended status: Standards Track M. Garcia-Martin Expires: September 10, 2009 Ericsson G. Sandbakken, Ed. TANDBERG March 9, 2009 Multi-party Chat Using the Message Session Relay Protocol (MSRP) draft-ietf-simple-chat-04 Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on September 10, 2009. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the Niemi, et al. Expires September 10, 2009 [Page 1] Internet-Draft Multi-party Chat MSRP March 2009 document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Abstract The Message Session Relay Protocol (MSRP) defines a mechanism for sending instant messages within a peer-to-peer session, negotiated using the Session Initiation Protocol (SIP) and the Session Description Protocol (SDP). This document defines the necessary tools for establishing multi-party chat sessions, or chat rooms, using MSRP. Niemi, et al. Expires September 10, 2009 [Page 2] Internet-Draft Multi-party Chat MSRP March 2009 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. Motivations and Requirements . . . . . . . . . . . . . . . . . 6 4. Overview of Operation . . . . . . . . . . . . . . . . . . . . 7 5. Creating, Joining, and Deleting a Chat Room . . . . . . . . . 9 5.1. Creating a Chat Room . . . . . . . . . . . . . . . . . . . 9 5.2. Joining a Chat Room . . . . . . . . . . . . . . . . . . . 9 5.3. Deleting a Chat Room . . . . . . . . . . . . . . . . . . . 10 6. Sending and Receiving Instant Messages . . . . . . . . . . . . 10 6.1. Regular Messages . . . . . . . . . . . . . . . . . . . . . 10 6.2. Private Messages . . . . . . . . . . . . . . . . . . . . . 12 7. Nicknames . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7.1. Using Nicknames within a Conference . . . . . . . . . . . 14 7.2. Modifying a Nickname . . . . . . . . . . . . . . . . . . . 15 7.3. Removing a Nickname . . . . . . . . . . . . . . . . . . . 16 7.4. Nicknames in the Conference Event Package . . . . . . . . 16 7.5. Nicknames not supported nor allowed . . . . . . . . . . . 16 8. The SDP 'chatroom' attribute . . . . . . . . . . . . . . . . . 16 9. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 9.1. Joining a chat room . . . . . . . . . . . . . . . . . . . 18 9.2. Setting up a nickname . . . . . . . . . . . . . . . . . . 19 9.3. Sending a regular message to the chat room . . . . . . . . 21 9.4. Sending a private message to a participant . . . . . . . . 23 9.5. Obtaining an anonymous URI . . . . . . . . . . . . . . . . 24 9.6. Sending a private message using anonymous URI . . . . . . 25 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 27 10.1. New MSRP Method . . . . . . . . . . . . . . . . . . . . . 27 10.2. New MSRP Header . . . . . . . . . . . . . . . . . . . . . 27 10.3. New MSRP Status Codes . . . . . . . . . . . . . . . . . . 27 10.4. New SDP Attribute . . . . . . . . . . . . . . . . . . . . 27 11. Security Considerations . . . . . . . . . . . . . . . . . . . 27 12. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 28 13. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 28 14. References . . . . . . . . . . . . . . . . . . . . . . . . . . 28 14.1. Normative References . . . . . . . . . . . . . . . . . . . 28 14.2. Informative References . . . . . . . . . . . . . . . . . . 29 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 29 Niemi, et al. Expires September 10, 2009 [Page 3] Internet-Draft Multi-party Chat MSRP March 2009 1. Introduction The Message Session Relay Protocol (MSRP) [RFC4975] defines a mechanism for sending a series of instant messages within a session. The Session Initiation Protocol (SIP) [RFC3261] in combination with the Session Description Protocol (SDP) [RFC3264] allows for two peers to establish and manage such sessions. In another application of SIP, a user agent can join in a multi-party conversation called a conference that is hosted by a specialized user agent called a focus [RFC4353]. Such a conference can naturally involve an MSRP session as one of possibly many media components. It is the responsibility of an entity handling the media to relay instant messages received from one participant to the rest of the participants in the conference. Several such systems already exist in the Internet. Participants in a chat room can be identified with a pseudonym or nickname, and decide whether their real identity is disclosed to other participants. Participants can also use a rich set of features such as the ability to send private instant messages to other participants. They also allow combining instant messaging with other media components, such as voice, video, white boarding, screen sharing, and file transfer. Similar conferences are already available today with other technologies different than MSRP. For example, Internet Relay Chat (IRC) [RFC2810], Extensible Messaging and Presence Protocol [RFC3920] based chat rooms, and many other proprietary systems provide this kind of functionality. It makes sense to specify equivalent functionality for MSRP-based systems to both provide competitive features as well as enable interworking between the systems. This document defines requirements, conventions, and extensions for providing private messages and nickname management in centralized conferences with MSRP. This document, however, does not specify functionality that can be used in conference with media different than MSRP. This memo uses the SIP Conferencing Framework [RFC4353] as a design basis. It also aims to be compatible with the Centralized Conferencing Framework [I-D.ietf-xcon-framework]. It is expected that future mechanisms will be developed for providing similar functionality in generic conferences, i.e., where the media is not only restricted to MSRP. The mechanisms described in this document provide a future compatible short-term solution for MSRP centralized conferences. Niemi, et al. Expires September 10, 2009 [Page 4] Internet-Draft Multi-party Chat MSRP March 2009 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119, BCP 14 [RFC2119], and indicate requirement levels for compliant implementations. This memo deals with a particular case of tightly coupled SIP conferences where the media exchanged consist of session-based instant messaging. Unless otherwise noted, we use the terminology defined in the SIP Conferencing Framework [RFC4353] applied to the scope of this document. In addition to that terminology, we introduce some new terms: Nickname: a pseudonym or descriptive name associated to a participant. See Section 7 for details Multi-party chat: an instance of a tightly coupled conference, in which the media exchanged between the participants consist of (among others) MSRP based instant messages. Also known as a chat room. Chat Room: a synonym for a multi-party chat Chat Room URI: a URI that identifies a particular chat room. Since a chat room is a specialized conference of instant messages, in the context of this document, a chat room URI is a synonym of a conference URI. Sender: the conference participant that originally created an instant message and sent it to the chat room for delivery. Recipient: the destination conference participant(s). This defaults to the full conference participant list, minus the IM Sender. MSRP switch: a media level entity that receives MSRP messages and delivers them to the other conference participants. An MSRP switch has a similar role to a conference mixer with the exception that an MSRP switch does not actually "mix" together different input media streams; it merely relays the messages between participants. Private Instant Message: an instant message sent in a chat room whose intended to a single participant. A private IM is usually rendered distinctly from the rest of the IMs, as to indicate that the message was a private communication. Niemi, et al. Expires September 10, 2009 [Page 5] Internet-Draft Multi-party Chat MSRP March 2009 Anonymous URI: a temporary GRUU that can be registered with the conference focus to conceal a participant's SIP AOR from the other participants in the a conference. 3. Motivations and Requirements Although conference frameworks describing many types of conferencing applications already exist, such as the Framework and Data Model for Centralized Conferencing [I-D.ietf-xcon-framework] and the SIP Conferencing Framework [RFC4353], the exact details of session-based instant messaging conferences are not well-defined at the moment. To allow interoperable chat implementations, for both conference- aware, and conference-unaware user agents, certain conventions for MSRP conferences need to be defined. It also seems beneficial to provide a set of features that enhance the baseline multi-party MSRP in order to be able to create systems that have functionality on par with existing chat systems, as well as enable building interworking gateways to these existing chat systems. We define the following requirements: REQ-1: A basic requirement is the existence of a multi-party conference, where participants can join and leave the conference and get instant messages exchanged to the rest of the participants. REQ-2: The conference must have the ability to host other media in addition to MSRP, as well as multiple streams of MSRP. REQ-3: A conference participant must be able to determine the identities of the sender and recipient of the received IMs. REQ-4: A conference participant must be able to determine the recipient of the received message. For instance, the recipient of the message might be the entire conference or a single participant of the conference (i.e., a private message). REQ-5: It must be possible to send a message to a single participant within the conference (i.e., a private instant message). REQ-6: A conference participant may have a nickname or pseudonym associated with their real identity. Niemi, et al. Expires September 10, 2009 [Page 6] Internet-Draft Multi-party Chat MSRP March 2009 REQ-7: It must be possible for a participant to change their nickname during the progress of the conference. REQ-8: It must be possible that a participant is only known by their nickname and not their real identity to the rest of the conference. REQ-9: It must be possible for the MSRP switch itself to send IMs to the conference (e.g. message of the day, welcome messages, server is shutting down, etc.) REQ-10: It must be possible for participants to learn the capabilities support of the features described in this document (and perhaps others). 4. Overview of Operation In order to set up a conference, one must first be created. Users wishing to host a conference themselves can of course do just that; their user agents simply morph from an ordinary user agent into a special purpose one called a conference focus. Another, commonly used setup is one where a dedicated node in the network functions as a conference focus. Each chat room has an identity of its own: a SIP URI that participants use to join the conference, e.g. by sending an INVITE request. The conference focus processes the invitations, and as such, maintains SIP dialogs with each participant. In an multi-party chat, or chat room, MSRP is one of the established media streams. Each conference participant establishes an MSRP session with an MSRP switch, which is a special purpose MSRP application. The MSRP switch is similar to a conference mixer in that it handles media sessions with each of the participants and bridges these streams together. However, unlike a conference mixer, the MSRP switch merely relays messages between participants but doesn't actually mix the streams in any way. The system is illustrated in Figure 1. Niemi, et al. Expires September 10, 2009 [Page 7] Internet-Draft Multi-party Chat MSRP March 2009 +------+ | MSRP | |Client| +------+ +--.---+ +------+ | MSRP | | | MSRP | |Client| | _|Client| +------._ | ,' +------+ `._ | ,' `.. +----------+ ,' `| |' | MSRP | | Switch | ,| |_ _,-'' +----------+ ``-._ +------.-' | `--+------+ | MSRP | | | MSRP | |Client| | |Client| +------+ | +------+ +---'--+ | MSRP | |Client| +------+ Figure 1: Multi-party chat in a Centralized Conference Typically conference participants also subscribe to the conference event package [RFC4575] to gather information about the conference roster in the form of conference state notifications. For example, participants can learn about other participants' identities. All messages in the chat room use the 'Message/CPIM' wrapper content type [RFC3862], so that it is possible to distinguish between private and regular messages. When a participant wants to send an instant message to the conference, it constructs an MSRP SEND request and submits it to the MSRP switch including a regular payload (e.g. a Message/CPIM message that contains a text, html, an image, etc.). The Message/CPIM To header is set to the chat room URI. The switch then fans out the SEND request to all of the other participants using their existing MSRP sessions. A participant can also send a private instant message addressed to a participants whose identity has been learned, e.g. via a notification from the conference event package [RFC4575]. In this case the sender creates an MSRP SEND request with a Message/CPIM body whose To header contains not the chat room URI but the recipient's URI. The MSRP switch then forwards the SEND request to the recipient. We extend the current MSRP negotiation that takes place in SDP Niemi, et al. Expires September 10, 2009 [Page 8] Internet-Draft Multi-party Chat MSRP March 2009 [RFC4566] to allow participants to learn whether the chat room supports and is willing to accept (e.g. due to local policy restrictions) certain MSRP functions defined in this memo, such as nicknames or private messaging. Naturally, when a participant wishes to leave a chat room, it sends a SIP BYE request to the conference focus and disconnects. 5. Creating, Joining, and Deleting a Chat Room 5.1. Creating a Chat Room Since we consider a chat room a particular type of conference where one of the offered media happens to be MSRP, the methods defined by the SIP Conference Framework [RFC4353] for creating conferences are directly applicable to a chat room. Once a chat room is created, it is identified by a SIP URI, like any other conference. 5.2. Joining a Chat Room Participants usually join the conference by sending an INVITE request to the conference URI. As long as the conference policy allows, the INVITE request is accepted by the focus and the user is brought into the conference. Participants are aware that the peer is a focus due to the presence of the "isfocus" feature tag [RFC3840] in the Contact header field of the 200-class response to the INVITE request. Participants are also aware that the mixer is an MSRP switch due to the presence of an additional 'message' media type and either TCP/ MSRP or TCP/TLS/MSRP as the protocol field in the SDP [RFC4566] media-line. The conference focus of a chat room MUST include support for a Message/CPIM [RFC3862] top-level wrapper for the MSRP messages by setting the 'accept-types' MSRP media line attribute in the SDP offer or answer to include 'Message/CPIM'. Note that the 'Message/CPIM' wrapper is used to carry the sender information that, otherwise, it will not be available to the recipient. Additionally, 'Message/CPIM' wrapper carries the recipient information (e.g. To and Cc: headers). If a participant wants to remain anonymous to the rest of the participants in the conference, the participant's UA can register or acquire by other means a temporary GRUU with the conference focus. The procedure SHOULD follow the recommendation of draft-ietf-sip-gruu Niemi, et al. Expires September 10, 2009 [Page 9] Internet-Draft Multi-party Chat MSRP March 2009 [I-D.ietf-sip-gruu]. The temporary GRUU can be used in the From and To header in the 'Message/CPIM' wrapper concealing the participant's SIP AOR from the other participants in the conference. The conference focus of a chat room MUST learn the chat room capabilities of each participant that joins the chat room, and MUST inform the MSRP switch of such support. This is to prevent that the MSRP switch distributes private messages to participants who do not support private messaging. 5.3. Deleting a Chat Room As with creating a conference, the methods defined by the SIP Conference Framework [RFC4353] for deleting a conference are directly applicable to a chat room. Deleting a chat room is an action that heavily depends on the policy of the chat room. The policy can determine that the chat room is deleted when the creator leaves the conference, or with any out of band mechanism. 6. Sending and Receiving Instant Messages 6.1. Regular Messages This section describes the conventions used to send and receive instant messages that are addressed to all the participants in the chat room. These are sent over a regular MSRP SEND request that contains a Message/CPIM wrapper [RFC3862] that in turn contains the desired payload (e.g. text, image, video-clip, etc.). When a chat room participant wishes to send an instant message to all the other participants in the chat room, he constructs an MSRP SEND request that MUST contain a top-level wrapper of type 'Message/CPIM' [RFC3862]. The actual instant message payload inside 'Message/CPIM' MAY be of any type negotiated in the SDP 'accepted-types' attribute according to the MSRP rules. The sender SHOULD populate the From header of the Message/CPIM wrapper with a proper identity by which the user is recognized in the conference. Identities that can be used (among others) are: o A SIP URI [RFC3261] representing the participant's address-of- record o A tel URI [RFC3966] representing the participant's telephone number Niemi, et al. Expires September 10, 2009 [Page 10] Internet-Draft Multi-party Chat MSRP March 2009 o An IM URI [RFC3860] representing the participant's instant messaging address o An temporary GRUU [I-D.ietf-sip-gruu] representing the anonymous URI associated with the sender. An MSRP switch that receives a SEND request from a participant SHOULD first verify that the From header field of the Message/CPIM wrapper is correctly populated with a valid URI. The valid URI can be the SIP AOR of the participant, or a temporary GRUU registered with the focus associated with an anonymous participant. If the URI included in the From header field of the Message/CPIM wrapper is not valid (e.g, because it does not "belong" to the user), then the MSRP switch MUST generate a 403 response and MUST NOT forward the SEND request to any of the participants. Otherwise, the MSRP switch SHOULD generate a 200 response according to the MSRP rules for response generation. Then the MSRP switch should inspect the To header field of the Message/CPIM wrapper. If the To header field of the Message/CPIM wrapper contains the chat room URI, the MSRP switch can generate a copy of the SEND request to each of the participants in the conference except the sender. The MSRP switch MUST NOT modify any of the bodies included in the received SEND request. Note that the MSRP switch does not need to wait for the reception of the complete MSRP chunk or MSRP message before it starts the distribution to the rest of the participants. Instead, once the MSRP switch has received the headers of the Message/CPIM body it SHOULD start the distribution process. The MSRP SHALL follow the success report and failure report handling described in section 7 of [RFC4975] when it receives a SEND request with a Message/CPIM wrapper having the To header field set to the chat room URI. The MSRP switch MAY use any report model in the copies of the SEND request intended for the recipients, but any received reports MUST NOT be forwarded to the originator of the original SEND request. The report model for handling private messages is different from SEND requests to the chat room (see Section 6.2 for details) An MSRP endpoint that receives a SEND request from an MSRP switch containing a Message/CPIM wrapper SHOULD first inspect the To header field of the Message/CPIM body. If the To header field is set to the chat room URI, then it is a regular message that has been distributed to all the participants in the conference. Then the MSRP endpoint SHOULD inspect the From header field of the Message/CPIM body to identify the sender. The From header field will include a URI that identifies the sender. The endpoint might have also received further identity information through a subscription to the SIP conference Niemi, et al. Expires September 10, 2009 [Page 11] Internet-Draft Multi-party Chat MSRP March 2009 event package [RFC4575]. 6.2. Private Messages This section describes the conventions used to send and receive private instant messages, i.e., instant messages that are addressed to one participant of the chat room rather to all of them. A chat room can signal support for private messages using the chatroom- attribute (see Section 8 for details). When a chat room participant wishes to send a private instant message to a participant the chat room, he constructs an MSRP SEND request that MUST contain a top-level wrapper of type 'Message/CPIM' [RFC3862]. The actual instant message payload inside 'Message/CPIM' MAY be of any type negotiated in the SDP 'accepted-types' attribute according to the MSRP rules (e.g. text, image, video-clip etc.) The sender SHOULD populate the From header of the Message/CPIM wrapper with a proper identity by which the user is recognized in the conference as indicated for regular instant messages. Then the sender MUST populate the To header field with the identity of intended recipient. The identity can be SIP, TEL, and IM URIs typically learned from the information received in notifications of the conference event package [RFC4575]. As for regular messages, an MSRP switch that receives a SEND request from a participant SHOULD first verify that the From header field of the Message/CPIM wrapper is correctly populated with a valid URI. If the URI included in the From header field of the Message/CPIM wrapper is not valid (e.g, because it does not "belong" to the user), then the MSRP switch MUST generate a 403 response and MUST NOT forward the SEND request to any of the participants. Otherwise, the MSRP switch SHOULD generate a 200 response according to the MSRP rules for response generation. Then the MSRP switch MUST inspect the To header field of the Message/ CPIM wrapper. If the To header field of the Message/CPIM wrapper does not contain the chat room URI, it must check if it contains a participants URI associated with a participant. If the URI in the To header can not be resolved (e.g. cased by a mistyped URI or that the recipient has abandoned he chat room), and the Failure-Report header field of the SEND request was either not present in the original request, or had a value of "yes" or "partial", the MSRP switch MUST generate a REPORT request to the sender. The status header field MUST be set to 427. The new 427 status code indicates a failure to resolve the recipient URI in the To header field. If the recipient is valid, but the recipient does not support private messages, and the Failure-Report header field of the SEND request was either not Niemi, et al. Expires September 10, 2009 [Page 12] Internet-Draft Multi-party Chat MSRP March 2009 present in the original request, or had a value of "yes" or "partial", the MSRP switch MUST send a REPORT request having the status code of 428. The new response 428 indicate that the recipient does not support private messages. In either case the REPORT request MUST include a Message/CPIM wrapper, with the original From header field included in the SEND request, and the To header field of the original message. The message MUST not be forwarded to the recipient if above conditions applies. The MSRP switch should search it's mapping table to find the MSRP session established towards the recipient. If a match is found the MSRP switch MUST create a SEND request and MUST copy the contents of the sender's message to it. If the original SEND request contained a Success-report header field with the value of "yes" it MUST be added to the SEND request intended for the recipient. If the MSRP switch receives an success report from the recipient of the private message, and the original request had the Success-report header field present with a value of "yes", the MSRP switch MUST create a success REPORT and MUST copy the contents of the recipient's report to it. The REPORT MUST be sent to the originator of the original SEND request. If the original SEND request contained the Success-report header field with the value of "no", it may be added to the SEND request intended for the recipient; but any received reports from the recipient MUST NOT be forwarded to the originator of the original SEND request. If the original SEND request contained a Failure-report header field with the value of "yes" or "partial" it MUST be added to the SEND request intended for the recipient. The MSRP switch MUST follow the Failure-Report handling described in section 7.1.1 of [RFC4975] If the MSRP switch receives a failure report from the recipient of the private message, and the original SEND request had the Failure-report header field present with the value of "yes" or "partial", the MSRP switch MUST create a failure REPORT and MUST copy the contents of the recipient's report to it. The REPORT MUST be sent to the originator of the original SEND request. If the original SEND request contained a Failure-report header field with the value of "no", it may be added to the SEND request intended for the recipient; but any received reports from the recipient MUST NOT be forwarded to the originator of the original SEND request. An MSRP endpoint that receives a SEND request from an MSRP switch containing a Message/CPIM wrapper SHOULD first inspect the To header field of the Message/CPIM body. If the To header field is not set to the chat room URI, then it is a private message. Then the MSRP endpoint SHOULD inspect the From header field of the Message/CPIM body to identify the sender. The From header field will include a URI that identifies the sender. The endpoint might have also received further identity information through a subscription to the Niemi, et al. Expires September 10, 2009 [Page 13] Internet-Draft Multi-party Chat MSRP March 2009 SIP conference event package [RFC4575]. It is possible that a participant, identified by a SIP Address of Record, joins a conference of instant messages from two or more different SIP UAs. It is RECOMMENDED that the an MSRP switch can map a participant or anonymous URI for two or more MSRP sessions. If the policy of the server allows for this, the MSRP switch MUST copy all messages intended for the recipient through each MSRP session. 7. Nicknames A common characteristic of existing chat room services is that participants have the ability to identify themselves with a nickname to the rest of the participants of the conference. It is used for easy reference of participants in the chat room, and can also provide anonymous participants with a meaningful descriptive name. Nicknames are a useful construct in many use cases, of which MSRP chat is but one example. Nicknames are an alternate form of identity, associated with a URI of which the participant is known to the focus. It is not a 'display-name', but it is used somewhat like a display name. A main difference is that a nickname is unique inside a chat room to allow an unambiguous reference to a participant in the chat. Nicknames may be long lived, or may be temporary. Users also need to reserve a nickname prior to its utilization. This memo specifies the nickname as a string. The nickname string MUST be unambiguous within the scope of the chat room (conference instance). This scope is similar to having a nickname unique inside a chat room from Extensible Messaging and Presence Protocol [RFC3920]. The chat room may have policies associated with nicknames. It may not accept nickname strings at all, or a it may provide a wider unambiguous scope like a domain or server, similar to Internet Relay Chat (IRC) [RFC2810]. 7.1. Using Nicknames within a Conference This memo provides a mechanism to reserve a nickname for a participant for as long as the participants is logged into the chat room. The mechanism is based on a NICKNAME MSRP method (see below) and a new "Use-Nickname" header. Note that other mechanisms may exists (for example, a web page reservation system), although they are outside the scope of this document. A conference participant who has established an MSRP session with an MSRP switch, where the MSRP switch has indicated the support and availability of nicknames with the 'nicknames' token in the Niemi, et al. Expires September 10, 2009 [Page 14] Internet-Draft Multi-party Chat MSRP March 2009 'chatroom' SDP attribute, MAY send a NICKNAME request to the MSRP switch. The NICKNAME request MUST include a new Use-Nickname header that contains the nickname string that the participant wants to reserve. An MSRP switch that receives a NICKNAME request containing a nickname in the Use-Nickname header field SHOULD first verify whether the policy of the chat room allows the nickname functionality. If is not allowed, the MSRP switch MUST answer with a 501 response. If the policy of the chat room allows the usage of nicknames, the MSRP switch SHOULD validate that the SIP AOR is entitled to reserve the nickname. The participant's authenticated identity can be derived after a successful HTTP Digest Authentication, included in a trusted SIP P-Asserted-Identity header field, included in a valid SIP Identity header field, or derived from any other present or future SIP authentication mechanism. Once the MSRP switch has validated that the participant is entitled to reserve the nickname, the MSRP switch answers to the MSRP NICKNAME request with a 200 response. The reservation of a nickname can fail, e.g. if the NICKNAME request contains a malformed or non-existent Use-Nickname header field, or if the same nickname has already been reserved by another participant in the conference. The validation can also fail where the SIP AOR is not entitled to reserve the nickname. In any of these cases the MSRP switch MUST answer with a newly defined 423 response. The semantics of the 423 response are: "Nickname usage failed; the nickname is not allocated to this user". As indicated earlier, this specification defines a new MSRP header field: "Use-Nickname". The Use-Nickname header field carries a nickname string, and SHOULD be included in the NICKNAME requests. The syntax of the NICKNAME method and the "Use-Nickname" header field is built upon the MSRP formal syntax [RFC4975] ext-method =/ NICKNAMEm NICKNAMEm = %x4E.49.43.4B.4E.41.4D.45 ; NICKNAME in caps ext-header =/ Use-Nickname ; ext-header is specified in RFC 4975 Use-Nickname = "Use-Nickname" ":" nickname nickname = quoted-string 7.2. Modifying a Nickname Typically participants will reserve a nickname as soon as they join the chat room. But it is also possible for participants to modify their own nicknames and replace them it a new one at any time during Niemi, et al. Expires September 10, 2009 [Page 15] Internet-Draft Multi-party Chat MSRP March 2009 the duration of the MSRP session. Modification of the nickname is not different from the initial reservation and usage of a nickname, thus the NICKNAME method is used as described in Section 7.1. If a NICKNAME request that attempts to modify the current nickname of the user for some reason fails, the current nickname stays in effect. A new nickname comes into effect and the old one is released only after a NICKNAME request is accepted with a 200 response. 7.3. Removing a Nickname If the participant no longer wants to be known by a nickname in the conference, the participant can follow the method described in Section 7.2. The nickname element of the Use-Nickname header MUST be set to an empty quoted string. 7.4. Nicknames in the Conference Event Package Typically the conference focus acts as a notifier of the SIP conference event package [RFC4575]. The conference focus MAY notify subscribers of the nickname reserved by a given participant. We define an extension to the conference event package to include nicknames. The extension adds a attribute to the containing the nickname string. 7.5. Nicknames not supported nor allowed The participants SHOULD be notified of the URIs associated with the other participants of the conference even if nicknames are provided. The entity attribute in event notification framework being an SIP AOR or anonymous URI. A client not supporting the extensions of this memo will not render nicknames and can therefore can not be referred to using nickname inside the chat room. The same would apply where a chat room do not allow nicknames to be used. 8. The SDP 'chatroom' attribute There are a handful of use cases where a participant would like to learn the chat room capabilities supported by the MSRP switch and the chat room. For example, a participant would like to learn if the MSRP switch supports private messaging, otherwise, the participant may send what he believes is a private instant message addressed to a participant, but since the MSRP switch does not support the functions specified in this memo, the message gets eventually distributed to all the participants of the chat room. Niemi, et al. Expires September 10, 2009 [Page 16] Internet-Draft Multi-party Chat MSRP March 2009 The reverse case also exists. A participant, say Alice, whose user agent does not support the extensions defined by this document joins the chat room. The MSRP switch learns that Alice application does not support private messaging nor nicknames. If another participant, say Bob, sends a private message to Alice, the MSRP switch does not distribute it to Alice, because Alice is not able to differentiate it from a regular message sent to the whole roster. Further more, if Alice replied to this message, she would do it to the whole roster. Because of this, the MSRP switch keeps also track of users who do not support the extensions defined in this document. In another scenario, the policy of a chat room may indicate that certain functions are not allowed. For example, the policy may indicate that nicknames or private messages are not allowed. In order to provide the user with a good chat room experience, we define a new 'chatroom' SDP attribute. The 'chatroom' attribute is a media-level attribute that MAY be included in conjunction with and MSRP media stream (i.e., when an m= line in SDP indicates "TCP/MSRP" or "TCP/TLS/MSRP"). The 'chatroom' attribute indicates the intersection of support and chat room local policy allowance for a number of functions specified in this document. Specifically, we provide the means for indicating support to use nicknames and private messaging. The 'chatroom' SDP attribute has the following syntax: chatroom = chatroom-label ":" chat-token *(SP chat-token) chatroom-label = "chatroom" chat-token = (nicknames-token | private-msg-token | token) nicknames-token = "nicknames" private-msg-token = "private-messages" A conference focus that includes the 'nicknames' token in the session description is signaling that the MSRP switch supports and the chat room allows to use the procedures specified in Section 7. A conference focus that includes the 'private-messages' in the SDP description is signaling that the MSRP switch supports and the chat room allows to use the procedures specified in Section 6.2. Example of the 'chatroom' attribute for an MSRP media stream that indicates the acceptance of nicknames and private messages: a=chatroom:nickname private-messages Niemi, et al. Expires September 10, 2009 [Page 17] Internet-Draft Multi-party Chat MSRP March 2009 9. Examples 9.1. Joining a chat room Figure 2 presents a flow diagram where Alice joins a chat room by sending an INVITE request. This INVITE request contains a session description that includes the chatroom extensions defined in this document. Alice Conference focus | | |(1) (SIP) INVITE | |----------------------->| |(2) (SIP) 200 OK | |<-----------------------| |(3) (SIP) ACK | |----------------------->| | | Figure 2: Flow diagram of a user joining a chat room F1: Alice constructs an SDP description that includes an MSRP media stream. She also indicates her support for the chatroom extensions defined in this document. She sends the INVITE request to the chat room server. INVITE sip:chatroom22@chat.example.com SIP/2.0 Via: SIP/2.0/TCP client.atlanta.example.com:5060;branch=z9hG4bK74bf9 Max-Forwards: 70 From: Alice ;tag=9fxced76sl To: Chatroom 22 Call-ID: 3848276298220188511@atlanta.example.com CSeq: 1 INVITE Contact: Content-Type: application/sdp Content-Length: [length] v=0 o=alice 2890844526 2890844526 IN IP4 client.atlanta.example.com s=- c=IN IP4 atlanta.example.com m=message 7654 TCP/MSRP * a=accept-types:message/cpim text/plain text/html a=path:msrp://client.atlanta.example.com:7654/jshA7weztas;tcp a=chatroom:nickname private-messages Figure 3: INVITE request containing an SDP offer with chat room extensions Niemi, et al. Expires September 10, 2009 [Page 18] Internet-Draft Multi-party Chat MSRP March 2009 F2: The chat room server accepts the session establishment. It includes the 'isfocus' and other relevant feature tags in the Contact header field of the response. The chat room server also builds an SDP answer that also that forces the reception of messages wrapped in message/cpim envelops. It also includes the the chatroom attribute with the allowed extensions. SIP/2.0 200 OK Via: SIP/2.0/TCP client.atlanta.example.com:5060;branch=z9hG4bK74bf9 ;received=192.0.2.101 From: Alice ;tag=9fxced76sl To: Chatroom 22 ;tag=8321234356 Call-ID: 3848276298220188511@atlanta.example.com CSeq: 1 INVITE Contact: \ ;methods="INVITE,BYE,OPTIONS,ACK,CANCEL,SUBSCRIBE,NOTIFY" \ ;automata;isfocus;message;event="conference" Content-Type: application/sdp Content-Length: [length] v=0 o=chat 2890844527 2890844527 IN IP4 chat.example.com s=- c=IN IP4 chat.example.com m=message 12763 TCP/MSRP * a=accept-types:message/cpim a=accept-wrapped-types:text/plain text/html * a=path:msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp a=chatroom:nickname private-messages Figure 4: 200 (OK) response including chat room extensions F3: The session established is acknowledged (details not shown). 9.2. Setting up a nickname Figure 5 shows an example of Alice setting up a nickname using the conference as provider. Her first proposal is not accepted because the proposed nickname is already in use. Her second proposal is accepted. Niemi, et al. Expires September 10, 2009 [Page 19] Internet-Draft Multi-party Chat MSRP March 2009 Alice MSRP switch | | |(1) (MSRP) NICKNAME | |----------------------->| |(2) (MSRP) 423 | |<-----------------------| |(3) (MSRP) NICKNAME | |----------------------->| |(4) (MSRP) 200 | |<-----------------------| | | Figure 5: Flow diagram of a user setting up her nickname F1: Alice sends an MSRP NICKNAME request that contains her proposed nicknames in the Set-Nickname header field. MSRP d93kswow NICKNAME To-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp From-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp Use-Nickname: "Alice the great" -------d93kswow$ Figure 6: MSRP NICKNAME request with an initial nickname proposal F2: The MSRP switch analyzes the existing allocation of nicknames and detects that the nickname "Alice is great" is already provided to another participant by the conference. The MSRP switch answers with a 423 response. MSRP d93kswow 423 Nickname usage failed To-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp From-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp -------d93kswow$ Figure 7: MSRP 423 response F3: Alice receives the response. She proposes a new nickname in a second NICKNAME request. MSRP 09swk2d NICKNAME To-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp From-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp Use-Nickname: "Alice in wonderland" -------09swk2d$ Figure 8: MSRP NICKNAME request with a second nickname proposal Niemi, et al. Expires September 10, 2009 [Page 20] Internet-Draft Multi-party Chat MSRP March 2009 F4: The MSRP switch accepts the nickname proposal and answers with a 200 response. MSRP 09swk2d 200 OK To-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp From-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp -------09swk2d$ Figure 9: MSRP NICKNAME request 9.3. Sending a regular message to the chat room Figure 10 depicts a flow diagram where Alice is sending a regular message addressed to the chat room. The MSRP switch distributes the message to the rest of the participants. Alice MSRP switch Bob Charlie | | | | | (1) (MSRP) SEND | | | |--------------------->| (3) (MSRP) SEND | | | (2) (MSRP) 200 |----------------------->| | |<---------------------| (4) (MSRP) SEND | | | |------------------------------->| | | (5) (MSRP) 200 OK | | | |<-----------------------| | | | (6) (MSRP) 200 OK | | | |<------------------------------ | | | | | | | | | Figure 10: Sending a regular message to the chat room F1: Alice builds a text message and wraps it in a CPIM message. She addresses the CPIM message to the chat room. She encloses the result in an MSRP SEND request and sends it to the MSRP switch via the existing TCP connection. Niemi, et al. Expires September 10, 2009 [Page 21] Internet-Draft Multi-party Chat MSRP March 2009 MSRP 3490visdm SEND To-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp From-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp Message-ID: 99s9s2 Byte-Range: 1-*/* Content-Type: message/cpim To: From: DateTime: 2009-03-02T15:02:31-03:00 Content-Type: text/plain Hello guys, how are you today? -------3490visdm$ Figure 11: Instant message addressed to all participants in the chat room F2: The MSRP switch acknowledges the reception of the SEND request with a 200 (OK) response. MSRP 3490visdm 200 OK To-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp From-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp Message-ID: 99s9s2 Byte-Range: 1-*/* -------3490visdm$ Figure 12: 200 (OK) response F3: The MSRP switch creates a new MSRP SEND request that contains the received message/cpim body and sends it to Bob. MSRP 490ej23 SEND To-Path: msrp://client.biloxi.example.com:4923/49dufdje2;tcp From-Path: msrp://chat.example.com:5678/jofofo3;tcp Message-ID: 304sse2 Byte-Range: 1-*/* Content-Type: message/cpim To: From: DateTime: 2009-03-02T15:02:31-03:00 Content-Type: text/plain Hello guys, how are you today? -------490ej23$ Niemi, et al. Expires September 10, 2009 [Page 22] Internet-Draft Multi-party Chat MSRP March 2009 Figure 13: Instant message sent to all participants The rest of the message flows are analogous to the previous. They are not shown here. 9.4. Sending a private message to a participant Figure 14 depicts a flow diagram where Alice is sending a private message addressed to Bob's SIP AOR. The MSRP switch distributes the message only to Bob. Alice MSRP switch Bob | | | | (1) (MSRP) SEND | | |--------------------->| (3) (MSRP) SEND | | (2) (MSRP) 200 |----------------------->| |<---------------------| | | | | | | | Figure 14: Sending a private message to Bob F1: Alice builds a text message and wraps it in a CPIM message. She addresses the CPIM message to the Bob's nickname, which she learned from a notification in the conference event package. She encloses the result in an MSRP SEND request and sends it to the MSRP switch via the existing TCP connection. MSRP 6959ssdf SEND To-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp From-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp Message-ID: okj3kw Byte-Range: 1-*/* Content-Type: message/cpim To: From: DateTime: 2009-03-02T15:02:31-03:00 Content-Type: text/plain Hello Bob. -------6959ssdf$ Figure 15: Private instant message addressed to one participant F2: The MSRP switch acknowledges the reception of the SEND request with a 200 (OK) response. Niemi, et al. Expires September 10, 2009 [Page 23] Internet-Draft Multi-party Chat MSRP March 2009 MSRP 6959ssdfm 200 OK To-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp From-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp Message-ID: okj3kw Byte-Range: 1-*/* -------6959ssdfm$ Figure 16: 200 (OK) response F3: The MSRP switch creates a new MSRP SEND request that contains the received message/cpim body and sends it only to Bob. Bob can distinguish the sender in the From header of the CPIM message. He also identifies this as a private message due to the To CPIM header. MSRP 9v9s2 SEND To-Path: msrp://client.biloxi.example.com:4923/49dufdje2;tcp From-Path: msrp://chat.example.com:5678/jofofo3;tcp Message-ID: d9fghe982 Byte-Range: 1-*/* Content-Type: message/cpim To: From: DateTime: 2009-03-02T15:02:31-03:00 Content-Type: text/plain Hello Bob. -------9v9s2$ Figure 17: Private instant message sent to Bob 9.5. Obtaining an anonymous URI Figure 18 presents a flow diagram where Alice registers her SIP AOR with the conference focus. The response will contain a temp-gruu which can be used as an anonymous URI when joining the conference. The temp-gruu is also used to send anonymous MSRP messages to and from the MSRP switch. Alice Conference focus | | |(1) (SIP) REGISTER | |----------------------->| |(2) (SIP) 200 OK | |<-----------------------| | | Figure 18: Flow diagram of registering an anonymous URI Niemi, et al. Expires September 10, 2009 [Page 24] Internet-Draft Multi-party Chat MSRP March 2009 F1: Alice constructs an REGISTER including an instance id in her Contact header defined in draft-ietf-sip-gruu [I-D.ietf-sip-gruu]. REGISTER sip:chatroom22@chat.example.com SIP/2.0 Via: SIP/2.0/TCP client.atlanta.example.com:5060;branch=z9hG4bK74bf9 Max-Forwards: 70 From: Alice ;tag=9fxced76sl To: Alice Supported: gruu Call-ID: 3848276298220188511@atlanta.example.com CSeq: 1 REGISTER Contact: \ ;+sip.instance="" Content-Length: 0 Figure 19: REGISTER request containing a Contact header with an instance id F2: The chat room server accepts the registration returning a "pub- gruu" and a "temp-gruu". SIP/2.0 200 OK Via: SIP/2.0/TCP client.atlanta.example.com:5060;branch=z9hG4bK74bf9 ;received=192.0.2.101 From: Alice ;tag=9fxced76sl To: Alice Call-ID: 3848276298220188511@atlanta.example.com CSeq: 1 REGISTER Contact: \ ;pub-gruu="sip:callee@example.com \ ;gr=urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6" \ ;temp-gruu="sip:tgruu.7hatz6cn-098s-anonymous@chat.example.com;gr" \ ;+sip.instance="" Content-Length: 0 Figure 20: 200 (OK) response including a temp-gruu in the Contact header 9.6. Sending a private message using anonymous URI Figure 21 depicts a flow diagram where Alice is utilizing the temporary GRUU when sending a private message to Bob Niemi, et al. Expires September 10, 2009 [Page 25] Internet-Draft Multi-party Chat MSRP March 2009 Alice MSRP switch Bob | | | | (1) (MSRP) SEND | | |--------------------->| (3) (MSRP) SEND | | (2) (MSRP) 200 |----------------------->| |<---------------------| | | | | | | | | | | Figure 21: Sending an anonymous private message to Bob F1: Alice builds a text message adding her registered temp-gruu to the From header of the CPIM message MSRP 7443ruls SEND To-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp From-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp Message-ID: aft4to Byte-Range: 1-*/* Content-Type: message/cpim To: From: DateTime: 2009-03-02T15:02:31-03:00 Content-Type: text/plain Hello Bob. -------7443ruls$ Figure 22: Anonymous private instant message F2: The MSRP switch inspects the From header field and verifies that the temp-gruuu in registered to Alice. If the temporary gruu is valid, the MSRP acknowledges the reception of SEND request with a 200 (OK) response MSRP 7443ruls 200 OK To-Path: msrp://client.atlanta.example.com:7654/jshA7weztas;tcp From-Path: msrp://chat.example.com:12763/kjhd37s2s20w2a;tcp Message-ID: aft4to Byte-Range: 1-*/* -------7443ruls$ Figure 23: 200 (OK) response Flow F3 is not shown Niemi, et al. Expires September 10, 2009 [Page 26] Internet-Draft Multi-party Chat MSRP March 2009 10. IANA Considerations 10.1. New MSRP Method This specification defines a new MSRP method to be added to the Methods sub-registry under the MSRP Parameter registry: NICKNAME. See section Section 7 for details. 10.2. New MSRP Header This specification defines a new MSRP header to be added to the header-field sub registry under the MSRP Parameter registry: Use-Nickname. See section Section 7 for details. 10.3. New MSRP Status Codes This specification defines three new MSRP status codes to be added to the Status-Code sub-registry under MSRP parameters. The 427 status code indicates the failure to resolve the recipient URI in the To header field of the Message/CPIM wrapper in the SEND request. See section for details. The 428 status code indicates that the recipient of a SEND request does not support private messages. See section for details. The 423 response indicates that the requested nickname is not allocated to the user requesting it. See section Section 7 for details. 10.4. New SDP Attribute This specification defines a new media level attribute in the Session Description Protocol (SDP) Parameters registry: chatroom. See section Section 8 for details. 11. Security Considerations This document proposes extensions to the Message Session Relay Protocol [RFC4975]. Therefore, the security considerations of such document apply to this document as well. In general, messages sent to a multi-party session based messaging focus are not deem to expose any security threat. Nevertheless, if a participant wants to avoid eavesdropping from non authorized entities, it should send those messages a TLS [RFC4346] transport connection, as allowed by MSRP. Niemi, et al. Expires September 10, 2009 [Page 27] Internet-Draft Multi-party Chat MSRP March 2009 12. Contributors This work would have never been possible without the fruitful discussions in the SIMPLE WG mailing list, specially with Brian Rosen (Neustar) and Paul Kyzivat (Cisco), who provided extensive review and improvements throughout the document. 13. Acknowledgments The authors want to thank Eva Leppanen, Adamu Haruna, Adam Roach and Matt Lepinski for providing comments. 14. References 14.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. [RFC3840] Rosenberg, J., Schulzrinne, H., and P. Kyzivat, "Indicating User Agent Capabilities in the Session Initiation Protocol (SIP)", RFC 3840, August 2004. [RFC3860] Peterson, J., "Common Profile for Instant Messaging (CPIM)", RFC 3860, August 2004. [RFC3862] Klyne, G. and D. Atkins, "Common Presence and Instant Messaging (CPIM): Message Format", RFC 3862, August 2004. [RFC4346] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.1", RFC 4346, April 2006. [RFC4566] Handley, M., Jacobson, V., and C. Perkins, "SDP: Session Description Protocol", RFC 4566, July 2006. [RFC4575] Rosenberg, J., Schulzrinne, H., and O. Levin, "A Session Initiation Protocol (SIP) Event Package for Conference State", RFC 4575, August 2006. [RFC4975] Campbell, B., Mahy, R., and C. Jennings, "The Message Session Relay Protocol (MSRP)", RFC 4975, September 2007. Niemi, et al. Expires September 10, 2009 [Page 28] Internet-Draft Multi-party Chat MSRP March 2009 [I-D.ietf-sip-gruu] Rosenberg, J., "Obtaining and Using Globally Routable User Agent (UA) URIs (GRUU) in the Session Initiation Protocol (SIP)", draft-ietf-sip-gruu-15 (work in progress), October 2007. 14.2. Informative References [RFC2810] Kalt, C., "Internet Relay Chat: Architecture", RFC 2810, April 2000. [RFC3264] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with Session Description Protocol (SDP)", RFC 3264, June 2002. [RFC3920] Saint-Andre, P., Ed., "Extensible Messaging and Presence Protocol (XMPP): Core", RFC 3920, October 2004. [RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966, December 2004. [RFC4353] Rosenberg, J., "A Framework for Conferencing with the Session Initiation Protocol (SIP)", RFC 4353, February 2006. [I-D.ietf-xcon-framework] Barnes, M., Boulton, C., and O. Levin, "A Framework for Centralized Conferencing", draft-ietf-xcon-framework-11 (work in progress), April 2008. Authors' Addresses Aki Niemi Nokia P.O. Box 407 NOKIA GROUP, FIN 00045 Finland Phone: +358 50 389 1644 Email: aki.niemi@nokia.com Niemi, et al. Expires September 10, 2009 [Page 29] Internet-Draft Multi-party Chat MSRP March 2009 Miguel A. Garcia-Martin Ericsson Calle Via de los Poblados 13 Madrid, ES 28033 Spain Email: miguel.a.garcia@ericsson.com Geir A. Sandbakken (editor) TANDBERG Philip Pedersens vei 20 N-1366 Lysaker Norway Phone: +47 67 125 125 Email: geir.sandbakken@tandberg.com URI: http://www.tandberg.com Niemi, et al. Expires September 10, 2009 [Page 30]